Support Online

Sales PTC     
sales@pitesco.com
02835176474
Mr. Nhật     
nhat@pitesco.com
0909352877

Products & Services

1. Trade Representative:

Pites Co., Ltd is one of leading agencies in industrial automation components and equipments for various industry such as Power Plant, Cement, Steel, Glass, Automation, Oil &Gas, Food and Berverage, Chemcial, Packaging, etc

2. Import and Distribution:

Pites Co., Ltd specializes in importing and distributing of Factory Automation (all kind of sensors), Process Instruments( Temperature, Pressure, Level, Flow, Valves, pH and chemical measurements, control valves, Gas/Air Analyzer) Motion Control (Motor, controller, inverter, PLC, Encoder, Linear Sensor, Position Sensor), Industrial Safety parts ( relay, switch, fuse...,), Swith Gear.

3. Service:

Pites provides engineering services including design and install, commissioning, relocating, maintaince , training...for a variety of industries with participation and technical support from specilists of well- known brands in Germany, Italy, Switzerland, USA, Japan, India and Singapore...

Lượt truy cập

Đang online 1
Lượt truy cập 10953

800 PID Controller - Agent of Gefran in Vietnam

800-pid-controller-agent-of-gefran-in-vietnam.png

800 PID Controller - Agent of Gefran in Vietnam

Overview
Microprocessor controller, format 48x48 (1/16 DIN) manufactured using SMT.

The instrument provides a complete operator interface, protected by a Lexan membrane that ensures level IP65 faceplate protection.

It has 4 keys, two green LED displays, each with 4 digits, 4 red indicating LED's for the 4 logic or relay outputs, and a further 3 LED's that are programmable to indicate the various operational states of the instrument.

The main input for the process variable is universal and provides the possibility to connect many types of input sensor: thermocouple type J, K, R, S, T, B, E, N, Ni-Ni18Mo, L; resistance thermometer Pt100 3-wires; thermistor PTC; linear inputs 0-50mV, 10-50mV, 2-10V, 0-10V, 0-20mA, 4-20mA, and potentiometer, all with the possibility of custom linearisation that can be defined using the faceplate keys.

It is possible to activate correction of the input using a linear function defined by way of two points on it.

The type of input is selected from the faceplate keys and no external shunts or adapter are required.

A second auxiliary isolated analogue input is available, which can also be configured for a linear input (0-10V, 2-10V, 0-20mA / 4-20mA), for remote setpoint, potentiometer or current transformer.

The auxiliary input function is completely configurable, including the possibility of a custom linearization. It is possible to configure the 2 available isolated digital inputs for selection of up to 4 local setpoints; start, stop and reset of internal timer; Auto/Man, Loc/Rem functions; alarms memory reset; input hold function.

The instrument can have up to 4 relay (3A/250V) or logic (12Vdc, 20mA) outputs and up to 2 islolated analogue outputs in voltage or current.

The function of each output is completely configurable by faceplate.

The available functions include: control output, alarm output, timer, digital input repetition, retransmission of process value, setpoints, deviation, alarm setpoint or value read from digital communication.

A further isolated output (10 or 24Vdc, 30mA max.) is available for powering external transmitters or potentiometers.

The serial communication interface RS485 (RS232C compatible) makes it possible to read or modify any parameter and to govern the instrument online (local/remote manual/automatic commutation, internal timer control, direct control of outputs).

Protocols available: MODBUS RTU and CENCAL (Gefran).

The optional serial communications can be Current Loop, RS232 or RS485, while the protocol can be selected between Gefran (Cencal) and Modbus.

Using these it is possible to write to any of the instrument parameters.

All the programming procedures of the instrument are facilitated by the grouping of the parameters in function blocks (CFG for the control parameters, Inp for the inputs, Out for the outputs, etc.) and by the possibility of selecting a simplified menu for entering the most frequently used parameters.

To simplify the configuration even further, a programming kit is available for PC, which includes a menu driven configuration program for Windows and the necessary cable to connect the instrument (see data sheet cod. 80021).

Agent of Gefran in Vietnam| Gefran Vietnam

For more products please click here